Graphics Class

Extends RenderComponent

Module: cc

Index

Properties

• lineWidth Number Current line width.
• lineJoin Graphics.LineJoin lineJoin determines how two connecting segments (of lines, arcs or curves) with non-zero lengths in a shape are joined together.
• lineCap Graphics.LineCap lineCap determines how the end points of every line are drawn.
• strokeColor Color stroke color
• fillColor Color fill color
• miterLimit Number Sets the miter limit ratio
• sharedMaterials [Material] The materials used by this render component.
• __eventTargets Array Register all related EventTargets,...
• node Node The node this component is attached to.
• uuid String The uuid for editor.
• _enabled Boolean
• enabled Boolean indicates whether this component is enabled or not.
• enabledInHierarchy Boolean indicates whether this component is enabled and its node is also active in the hierarchy.
• _isOnLoadCalled Number Returns a value which used to indicate the onLoad get called or not.
• _name String
• _objFlags Number
• name String The name of the object.
• isValid Boolean Indicates whether the object is not yet destroyed.

Methods

• moveTo Move path start point to (x,y).
• lineTo Adds a straight line to the path
• bezierCurveTo Adds a cubic Bézier curve to the path
• quadraticCurveTo Adds a quadratic Bézier curve to the path
• arc Adds an arc to the path which is centered at (cx, cy) position with radius r starting at startAngle and ending at endAngle going in the given direction by counterclockwise (defaulting to false).
• ellipse Adds an ellipse to the path.
• circle Adds an circle to the path.
• rect Adds an rectangle to the path.
• roundRect Adds an round corner rectangle to the path.
• fillRect Draws a filled rectangle.
• clear Erasing any previously drawn content.
• close Causes the point of the pen to move back to the start of the current path.
• stroke Strokes the current or given path with the current stroke style.
• fill Fills the current or given path with the current fill style.
• getMaterial Get the material by index.
• getMaterials Gets all the materials.
• setMaterial Set the material by index.
• update This is a lifecycle method.
• lateUpdate This is a lifecycle method.
• __preload __preload is called before every onLoad.
• onLoad When attaching to an active node or its node first activated.
• start Called before all scripts' update if the Component is enabled the first time.
• onEnable This is a lifecycle method.
• onDisable This is a lifecycle method.
• onDestroy This is a lifecycle method.
• onFocusInEditor
• onLostFocusInEditor
• resetInEditor Called to initialize the component or node’s properties when adding the component the first time or when the Reset command is used.
• addComponent Adds a component class to the node.
• getComponent Returns the component of supplied type if the node has one attached, null if it doesn't....
• getComponents Returns all components of supplied Type in the node.
• getComponentInChildren Returns the component of supplied type in any of its children using depth first search.
• getComponentsInChildren Returns the components of supplied type in self or any of its children using depth first search.
• _getLocalBounds If the component's bounding box is different from the node's, you can implement this method to supply
• onRestore for undo/redo operation.
• schedule Schedules a custom selector....
• scheduleOnce Schedules a callback function that runs only once, with a delay of 0 or larger.
• unschedule Unschedules a custom callback function.
• unscheduleAllCallbacks unschedule all scheduled callback functions: custom callback functions, and the 'update' callback function....
• destroy Actual object destruction will delayed until before rendering.
• _destruct Clear all references in the instance.
• _onPreDestroy Called before the object being destroyed.
• _serialize The customized serialization for this object.
• _deserialize Init this object from the custom serialized data.

Details

Properties

lineWidth

Current line width.

lineJoin

lineJoin determines how two connecting segments (of lines, arcs or curves) with non-zero lengths in a shape are joined together.

lineCap

lineCap determines how the end points of every line are drawn.

strokeColor

stroke color

fillColor

fill color

miterLimit

Sets the miter limit ratio

sharedMaterials

The materials used by this render component.

__eventTargets

Register all related EventTargets, all event callbacks will be removed in _onPreDestroy.

node

The node this component is attached to. A component is always attached to a node.

Examples

cc.log(comp.node);

uuid

The uuid for editor.

Examples

cc.log(comp.uuid);

_enabled

enabled

indicates whether this component is enabled or not.

Examples

comp.enabled = true;
cc.log(comp.enabled);

enabledInHierarchy

indicates whether this component is enabled and its node is also active in the hierarchy.

Examples

cc.log(comp.enabledInHierarchy);

_isOnLoadCalled

Returns a value which used to indicate the onLoad get called or not.

Examples

cc.log(this._isOnLoadCalled > 0);

_name

_objFlags

name

The name of the object.

Examples

obj.name = "New Obj";

isValid

Indicates whether the object is not yet destroyed. (It will not be available after being destroyed)
When an object's destroy is called, it is actually destroyed after the end of this frame. So isValid will return false from the next frame, while isValid in the current frame will still be true. If you want to determine whether the current frame has called destroy, use cc.isValid(obj, true), but this is often caused by a particular logical requirements, which is not normally required.

Examples

var node = new cc.Node();
cc.log(node.isValid);    // true
node.destroy();
cc.log(node.isValid);    // true, still valid in this frame
// after a frame...
cc.log(node.isValid);    // false, destroyed in the end of last frame

Methods

moveTo

Move path start point to (x,y).

Parameters

• x Number The x axis of the coordinate for the end point.
• y Number The y axis of the coordinate for the end point.

lineTo

Adds a straight line to the path

Parameters

• x Number The x axis of the coordinate for the end point.
• y Number The y axis of the coordinate for the end point.

bezierCurveTo

Adds a cubic Bézier curve to the path

Parameters

• c1x Number The x axis of the coordinate for the first control point.
• c1y Number The y axis of the coordinate for first control point.
• c2x Number The x axis of the coordinate for the second control point.
• c2y Number The y axis of the coordinate for the second control point.
• x Number The x axis of the coordinate for the end point.
• y Number The y axis of the coordinate for the end point.

quadraticCurveTo

Adds a quadratic Bézier curve to the path

Parameters

• cx Number The x axis of the coordinate for the control point.
• cy Number The y axis of the coordinate for the control point.
• x Number The x axis of the coordinate for the end point.
• y Number The y axis of the coordinate for the end point.

arc

Adds an arc to the path which is centered at (cx, cy) position with radius r starting at startAngle and ending at endAngle going in the given direction by counterclockwise (defaulting to false).

Parameters

• cx Number The x axis of the coordinate for the center point.
• cy Number The y axis of the coordinate for the center point.
• r Number The arc's radius.
• startAngle Number The angle at which the arc starts, measured clockwise from the positive x axis and expressed in radians.
• endAngle Number The angle at which the arc ends, measured clockwise from the positive x axis and expressed in radians.
• counterclockwise Boolean An optional Boolean which, if true, causes the arc to be drawn counter-clockwise between the two angles. By default it is drawn clockwise.

ellipse

Adds an ellipse to the path.

Parameters

• cx Number The x axis of the coordinate for the center point.
• cy Number The y axis of the coordinate for the center point.
• rx Number The ellipse's x-axis radius.
• ry Number The ellipse's y-axis radius.

circle

Adds an circle to the path.

Parameters

• cx Number The x axis of the coordinate for the center point.
• cy Number The y axis of the coordinate for the center point.
• r Number The circle's radius.

rect

Adds an rectangle to the path.

Parameters

• x Number The x axis of the coordinate for the rectangle starting point.
• y Number The y axis of the coordinate for the rectangle starting point.
• w Number The rectangle's width.
• h Number The rectangle's height.

roundRect

Adds an round corner rectangle to the path.

Parameters

• x Number The x axis of the coordinate for the rectangle starting point.
• y Number The y axis of the coordinate for the rectangle starting point.
• w Number The rectangles width.
• h Number The rectangle's height.
• r Number The radius of the rectangle.

fillRect

Draws a filled rectangle.

Parameters

• x Number The x axis of the coordinate for the rectangle starting point.
• y Number The y axis of the coordinate for the rectangle starting point.
• w Number The rectangle's width.
• h Number The rectangle's height.

clear

Erasing any previously drawn content.

Parameters

• clean Boolean Whether to clean the graphics inner cache.

close

Causes the point of the pen to move back to the start of the current path. It tries to add a straight line from the current point to the start.

stroke

Strokes the current or given path with the current stroke style.

fill

Fills the current or given path with the current fill style.

getMaterial

Get the material by index.

Parameters

• index Number

getMaterials

Gets all the materials.

setMaterial

Set the material by index.

Parameters

• index Number
• material Material

update

Update is called every frame, if the Component is enabled.
This is a lifecycle method. It may not be implemented in the super class. You can only call its super class method inside it. It should not be called manually elsewhere.

Parameters

• dt Number the delta time in seconds it took to complete the last frame

lateUpdate

LateUpdate is called every frame, if the Component is enabled.
This is a lifecycle method. It may not be implemented in the super class. You can only call its super class method inside it. It should not be called manually elsewhere.

Parameters

• dt Number the delta time in seconds it took to complete the last frame

__preload

__preload is called before every onLoad. It is used to initialize the builtin components internally, to avoid checking whether onLoad is called before every public method calls. This method should be removed if script priority is supported.

onLoad

When attaching to an active node or its node first activated. onLoad is always called before any start functions, this allows you to order initialization of scripts.
This is a lifecycle method. It may not be implemented in the super class. You can only call its super class method inside it. It should not be called manually elsewhere.

start

Called before all scripts' update if the Component is enabled the first time. Usually used to initialize some logic which need to be called after all components' onload methods called.
This is a lifecycle method. It may not be implemented in the super class. You can only call its super class method inside it. It should not be called manually elsewhere.

onEnable

Called when this component becomes enabled and its node is active.
This is a lifecycle method. It may not be implemented in the super class. You can only call its super class method inside it. It should not be called manually elsewhere.

onDisable

Called when this component becomes disabled or its node becomes inactive.
This is a lifecycle method. It may not be implemented in the super class. You can only call its super class method inside it. It should not be called manually elsewhere.

onDestroy

Called when this component will be destroyed.
This is a lifecycle method. It may not be implemented in the super class. You can only call its super class method inside it. It should not be called manually elsewhere.

onFocusInEditor

onLostFocusInEditor

resetInEditor

Called to initialize the component or node’s properties when adding the component the first time or when the Reset command is used. This function is only called in editor.

addComponent

Adds a component class to the node. You can also add component to node by passing in the name of the script.

Parameters

• typeOrClassName Function | String the constructor or the class name of the component to add

Examples

var sprite = node.addComponent(cc.Sprite);
var test = node.addComponent("Test");

getComponent

Returns the component of supplied type if the node has one attached, null if it doesn't.
You can also get component in the node by passing in the name of the script.

Parameters

• typeOrClassName Function | String

Examples

// get sprite component.
var sprite = node.getComponent(cc.Sprite);
// get custom test calss.
var test = node.getComponent("Test");

getComponents

Returns all components of supplied Type in the node.

Parameters

• typeOrClassName Function | String

Examples

var sprites = node.getComponents(cc.Sprite);
var tests = node.getComponents("Test");

getComponentInChildren

Returns the component of supplied type in any of its children using depth first search.

Parameters

• typeOrClassName Function | String

Examples

var sprite = node.getComponentInChildren(cc.Sprite);
var Test = node.getComponentInChildren("Test");

getComponentsInChildren

Returns the components of supplied type in self or any of its children using depth first search.

Parameters

• typeOrClassName Function | String

Examples

var sprites = node.getComponentsInChildren(cc.Sprite);
var tests = node.getComponentsInChildren("Test");

_getLocalBounds

If the component's bounding box is different from the node's, you can implement this method to supply a custom axis aligned bounding box (AABB), so the editor's scene view can perform hit test properly.

Parameters

• out_rect Rect the Rect to receive the bounding box

onRestore

onRestore is called after the user clicks the Reset item in the Inspector's context menu or performs an undo operation on this component.

If the component contains the "internal state", short for "temporary member variables which not included
in its CCClass properties", then you may need to implement this function.

The editor will call the getset accessors of your component to record/restore the component's state
for undo/redo operation. However, in extreme cases, it may not works well. Then you should implement
this function to manually synchronize your component's "internal states" with its public properties.
Once you implement this function, all the getset accessors of your component will not be called when
the user performs an undo/redo operation. Which means that only the properties with default value
will be recorded or restored by editor.

Similarly, the editor may failed to reset your component correctly in extreme cases. Then if you need
to support the reset menu, you should manually synchronize your component's "internal states" with its
properties in this function. Once you implement this function, all the getset accessors of your component
will not be called during reset operation. Which means that only the properties with default value
will be reset by editor.

This function is only called in editor mode.

schedule

Schedules a custom selector.
If the selector is already scheduled, then the interval parameter will be updated without scheduling it again.

Parameters

• callback function The callback function
• interval Number Tick interval in seconds. 0 means tick every frame.
• repeat Number The selector will be executed (repeat + 1) times, you can use cc.macro.REPEAT_FOREVER for tick infinitely.
• delay Number The amount of time that the first tick will wait before execution. Unit: s

Examples

var timeCallback = function (dt) {
  cc.log("time: " + dt);
}
this.schedule(timeCallback, 1);

scheduleOnce

Schedules a callback function that runs only once, with a delay of 0 or larger.

Parameters

• callback function A function wrapped as a selector
• delay Number The amount of time that the first tick will wait before execution. Unit: s

Examples

var timeCallback = function (dt) {
  cc.log("time: " + dt);
}
this.scheduleOnce(timeCallback, 2);

unschedule

Unschedules a custom callback function.

Parameters

• callback_fn function A function wrapped as a selector

Examples

this.unschedule(_callback);

unscheduleAllCallbacks

unschedule all scheduled callback functions: custom callback functions, and the 'update' callback function.
Actions are not affected by this method.

Examples

this.unscheduleAllCallbacks();

destroy

Destroy this Object, and release all its own references to other objects.
Actual object destruction will delayed until before rendering. From the next frame, this object is not usable anymore. You can use cc.isValid(obj) to check whether the object is destroyed before accessing it.

Examples

obj.destroy();

_destruct

Clear all references in the instance.

NOTE: this method will not clear the getter or setter functions which defined in the instance of CCObject. You can override the _destruct method if you need, for example:

_destruct: function () {
    for (var key in this) {
        if (this.hasOwnProperty(key)) {
            switch (typeof this[key]) {
                case 'string':
                    this[key] = '';
                    break;
                case 'object':
                case 'function':
                    this[key] = null;
                    break;
        }
    }
}

_onPreDestroy

Called before the object being destroyed.

_serialize

The customized serialization for this object. (Editor Only)

Parameters

• exporting Boolean

_deserialize

Init this object from the custom serialized data.

Parameters

• data Object the serialized json data
• ctx _Deserializer